Kilowatt hour meter bench tester (energy meter test bench)

Detailed Product Description

A Introduction

PTC-8125Dsingle phase energy auto-calibration system is a new generation, high precision, energy meter calibration equipment. It uses the international's most advanced technology and components available in 90 decade . The equipment works under the control of keyboard or remote computer.

B Features
PWM amplifier provide high ranges output of voltage and current, the power source efficiency better than 85%.
The whole course Programme-controlled for output voltage/current.
Diagnostic controll of voltage and current output and with control protection and alarm.
Good stability, high reliability, and good quality of load.
Control output capacity: voltage (200-1000VA), current (200- 1000VA).
Test same model but different constant meters in the same time.
Voltage isolation for testing closed I-P single-phase meter.
Auto-search mark function for no load and starting test.
Increase the work efficiency by installed the photo-pickup turn- over rack device.
Calibration software with PC based under win98/2000/xp which the data result can be saved, searched, and printed out.
Database providing with statistic and category, information check, and management.
Logical configuration, reasonable design, pretty outfit, for physical operation.
Manual keyboard which has Imax 600%lb /500%lb 400%Ib /200%Ib /100%Ib;1.0L/05.L/0.5C and etc for normal use.

Aluminum compound configuration and pretty outfit.

The energy meter hanging rack is made by Aluminum compound. The bench operation panel is made by fire and heat prevention fiber. The whole device configuration is a reasonable design, nice outfit, save and practical test bench.

Digital controlled signal source

The signal source is using the newest digital control technology. It can adjust easily the output signal of frequency, amplitude value, phase by software not need the regular potential voltage adjustment.

PWM power amplifier

This bench is using the PWM to enlarge the capacity of voltage (current) output, higher the efficiency of power supply (>85%), with lower heat. The PWM has the perfect function for checking, diagnostic and protect circuit to avoid the man-made mistake to avoid damage the bench. This PWM suits to work for long time continuously and output the appointed range of voltage, current, resistive load, capacitive load, inductive load work.

The voltage is isolated output for each of energy meter.

The voltage of each byte of energy meter is isolated by PT output. The voltage of each byte is absolutely independent which suits for the voltage/current hooking test of signal phase energy meter and easy operation for personnel.

The error processor system

The bench is using the error processor system to directly see the error of each energy meter by the sub-error processor system for each byte of meter. Every sub-error processor system can be connected by the internal RS485, which together collects the data to the computer and accept the signal from photo-pickup and pulse output from energy meter. The same specification (voltage/current) but different constant energy meter can be tested at same time.

Three levels adjustment for photo-pickup

The photo-pickup device can be adjusted for three levels, which can accept the signal of rotek energy meter and LED signal to fit the different energy meter for error test.

Manual keyboard operation

The bench has the manual directly operation panel keyboard, which has Imax / 600%Ib / 400%Ib / 200%Ib / 100%Ib / 50%Ib / 20%Ib / 10%Ib / 1.0L / 0.5L / 0.5C / 8L / 0.8C for normal testing and easily to adjust the error.

Auto-search mark function

This function is for user easily to scale correctly during the latent test and start test. The internal of bench has the auto-search black marker function which can precisely scale the black marker during these two tests, and also process the accuracy of time control.

The computer auto-testing software

The bench has the panel operation keyboard or PC programmable operation control. When the user needs to use the auto-testing function, can choose the PC programmable operation control. The operation testing software is under WINDOWS98/XP/2000 which can auto-testing different energy meter. The automation level of software is very high which the energy meter only need to be hanged, and easily to adjust the photo-pickup and sets the testing parameters, the whole examining courses can be done by the PC auto-testing software. This software includes a small DBMS to realize the data from energy meter for gathering statistics, category, search and management. It can check the error data on the tested energy meter to process research and gathering statistics job, and also printing out.

C TechnicalSpecification

1.Accuracy class: 0.1/0.2/0.3%

2.Standard equipment:

Standard energy meteraccuracy class: 0.1/0.2/0.3%

StandardCTaccuracy class: 0.01/0.02/0.05%

3.Output range:

Output voltage:0~220V

Output current:0~100A

4.Adjustable range:

Voltage:0-120%

Current:0-120%

Phase (Voltage/current): 0-360.0Fine adjustment: 0.1°

Frequency: 45-65HzFine adjustment: 0.1Hz

5. PowerStability: ≤0.1%/3 minutePF=1.0L

Waveform distortion coefficient: ≤1.0%

Indicator :31/2digitto showtheerror

CommunicationInterface :RS232/485

Number of meters calibrated : 24(or depend on user's request)

The maximum power consumption :1200VA

Input Power : 220V(1±10%)

Working Environment :

Temperature20±5°C

Relative Humidity≤85%